The Pipe/Porting Planning Process Continued

------------- All Transfer Ducts ------------

-----Pairs of Transfer Ducts / Individual Boost Duct-----
	1st Pair	2nd Pair	3rd Pair	Boost Duct
Effective duct width
Up sweep angle
Radius at top corners
Radius at bottom corners
Duct roof height
------------- Exhaust Port ------------



Please use only ONE of the following to describe your exhaust port dimensions... the "Effective Method" or the "Delta Strip Method"
Effective Width Method Use for substantially square or rectangular ports... (subtract width of any ring bridge from total width)

------------------or------------------
Delta Strips Silhouette Method Use for irregular shaped ports... Input width of port window beginning at roof height and then width @ each vertical increment below roof down to floor (I suggest using every 1.0 mm or .040" as vertical increment points... subtract width of any ring bridge from total width). Use as many entry data points as you require.



































Auxillary Exhaust Ports? Yes No



If you have EGT data, please enter individual temps @ each RPM here:

After pressing "Send" above, you will automatically go here to fill out the exhaust system form completing the required planning input information. Thanks for your interest!

Auto Harley Vintage Jap Bike Two Stroke Int-Exh Syst Outboard History Ref's Links Search Home